Resources / Technical Articles
Technical Articles for Humidity-Control Decisions
Browse application notes, engineering explanations, equipment comparisons, and practical guidance for agriculture, energy, electrical, and industrial environments.
Use the article library to understand a technical question, then return to the resource center for cases, product information, video, and project-preparation material.
Start with the operating condition behind the question. Search by application, humidity risk, equipment type, installation condition, or technical topic.
BROWSE ARTICLE TOPICS
Start with the application or equipment context
01
Agriculture & Controlled Environments
Application notes and selection guidance for greenhouses, indoor cultivation rooms, drying spaces, and storage environments where humidity affects the crop rather than the building.
Browse articles → 02Industrial Dehumidification
Comparisons and engineering notes covering refrigerant, ceiling-mounted, desiccant, and low-dew-point equipment, and the operating conditions that decide between them.
Browse articles → 03Energy Storage & Electrical Environments
Guidance on dew point, condensation risk, compact installation, controls, and validation for battery energy storage, cabinets, containers, and switchgear.
Browse articles → 04Commercial & Building Moisture Control
Practical guidance on condensation, water damage, drying, mold prevention, and equipment choices for commercial spaces and building moisture problems.
Browse articles → 05Humidification & Air Quality
Technical articles on humidification, ventilation, filtration, humidity measurement, and how moisture control interacts with wider air systems.
Browse articles → 06Humidity Science & Engineering
Explanations of relative humidity, dew point, condensation, moisture measurement, monitoring, and controls for industrial humidity-control decisions.
Browse articles →TECHNICAL ARTICLE LIBRARY
Search, filter, and continue from the topic relevant to your work
Each article has a clear place in the resource library and connects to relevant industries, product families, cases, and project support.
FIND THE RIGHT RESOURCE
Search article titles, summaries, categories, and technical topics.
Search across the resource library.
Why an IP-Rated Enclosure Can Still Condense
An IP-rated enclosure can still condense because ingress protection and condensation control are different design questions. IEC 60529 classifies how an enclosure protects against access to hazardous parts, solid foreign objects and water under specified conditions. It does not guarantee that eve…
Consistency Across Multiple Battery Cabinets: Controls, Alarms and Maintenance
A multi-cabinet battery energy storage system needs more than identical dehumidifiers. Consistency depends on using the same equipment definition, sensor basis, control states, alarm meanings, communication map, drainage arrangement, maintenance method and acceptance test.
Commissioning and Validation Checklist for BESS Humidity-Control Equipment
Commissioning a BESS humidity-control device means proving more than “the unit turns on.” The installed system must move air through the intended zone, remove moisture under the relevant condition, drain safely, report useful status and recover after a defined moisture event.
Condensate Drainage for Battery Cabinets and Containers
Condensate drainage is part of the dehumidifier installation, not an accessory decision to make on site. A correctly selected unit can still wet a battery cabinet if the tray is not level, the hose rises, the outlet freezes, the termination allows backflow, or the enclosure penetration is poorly…
Connecting Dehumidifiers to BMS and EMS
Connecting a dehumidifier to a BMS or EMS starts with a signal and data list, not with the phrase “RS485 required.” RS485 describes an electrical serial layer. It does not define the register map, alarm meanings, command authority, update rate or commissioning test.
How to Diagnose Condensation in Battery Cabinets
Diagnosing condensation in a battery cabinet or BESS container starts with two traces on the same time axis: internal dew point and the temperature of the coldest suspected surface. Water forms wherever the surface trace reaches or falls below the dew-point trace. The rest of the investigation id…
BESS Container Dehumidifier Sizing: Required Inputs
A 20 ft or 40 ft BESS container does not have a standard dehumidifier capacity. Container length describes the outer boundary, not the moisture load. Two containers of the same size can require very different equipment because their free air volume, ventilation, door use, internal temperature, cl…
Heater, Ventilation or Dehumidifier for Enclosures?
Choose an enclosure heater when one or a few surfaces need to stay above dew point. Choose ventilation when the incoming air is demonstrably drier and airflow serves a defined purpose. Choose active dehumidification when the enclosure's moisture content must be reduced across changing temperature…
Why BESS Containers Still Condense with Air Conditioning
A BESS container can condense while its air conditioner is operating because temperature control and dew-point control are not the same duty. Cooling may remove some water when the coil is below dew point, but it also creates cold surfaces. During cycling, shutdown, humid ventilation or door open…
Greenhouse Dehumidification: Where It Fits, What It Costs, and How to Size It
Almost every litre of irrigation water that does not leave as drain leaves as water vapour. In a greenhouse, that vapour is the humidity problem — and it means the moisture load is not a weather condition to be endured but a quantity that can be measured from records the grower already keeps.
Ventilation vs. Dehumidification in Controlled Agriculture: The Test That Decides It
Outside air at 90 % relative humidity can dry a greenhouse. Outside air at 85 % relative humidity can make it wetter. The difference has nothing to do with the humidity readings and everything to do with temperature — and getting this backwards is the most common reason a ventilation strategy qui…
Humidity Control in Battery Cabinets and Enclosures: Why Condensation Is the Real Design Problem
Most humidity problems in battery energy storage are not humidity problems. They are surface temperature problems.
NO MATCHING RESOURCES
Try a broader term or describe the application differently.
Search by equipment type, humidity issue, industry, installation condition, or a technical topic.
APPLY THE INFORMATION
Need help applying an article to a real project?
Share the application, operating conditions, target, and installation limits. We can help identify the questions that matter before product selection or engineering review.
Discuss Your Requirement