Resources / Technical Articles
Technical Articles for Humidity-Control Decisions
Browse application notes, engineering explanations, equipment comparisons, and practical guidance for agriculture, energy, electrical, and industrial environments.
Use the article library to understand a technical question, then return to the resource center for cases, product information, video, and project-preparation material.
Start with the operating condition behind the question. Search by application, humidity risk, equipment type, installation condition, or technical topic.
BROWSE ARTICLE TOPICS
Start with the application or equipment context
01
Agriculture & Controlled Environments
Application notes and selection guidance for greenhouses, indoor cultivation rooms, drying spaces, and storage environments where humidity affects the crop rather than the building.
Browse articles → 02Industrial Dehumidification
Comparisons and engineering notes covering refrigerant, ceiling-mounted, desiccant, and low-dew-point equipment, and the operating conditions that decide between them.
Browse articles → 03Energy Storage & Electrical Environments
Guidance on dew point, condensation risk, compact installation, controls, and validation for battery energy storage, cabinets, containers, and switchgear.
Browse articles → 04Commercial & Building Moisture Control
Practical guidance on condensation, water damage, drying, mold prevention, and equipment choices for commercial spaces and building moisture problems.
Browse articles → 05Humidification & Air Quality
Technical articles on humidification, ventilation, filtration, humidity measurement, and how moisture control interacts with wider air systems.
Browse articles → 06Humidity Science & Engineering
Explanations of relative humidity, dew point, condensation, moisture measurement, monitoring, and controls for industrial humidity-control decisions.
Browse articles →TECHNICAL ARTICLE LIBRARY
Search, filter, and continue from the topic relevant to your work
Each article has a clear place in the resource library and connects to relevant industries, product families, cases, and project support.
FIND THE RIGHT RESOURCE
Search article titles, summaries, categories, and technical topics.
Search across the resource library.
Accurate Moisture Content Analysis – Techniques & Challenges
Select a material moisture-content method by material, sampling plan, wet or dry basis, reference accuracy, matrix effects and decision requirements.
AC Humidity Control: Diagnose Coil, Drain and Control Problems
Troubleshoot air-conditioning humidity control through the cooling coil, condensate drain, fan and ventilation controls, and moisture sources before changing settings or equipment.
Home Moisture Removal Methods: Choose the Right Fix
Choose a home moisture-removal method by identifying liquid water, humid air or cold-surface condensation first. Compare extraction, source exhaust, ventilation, dehumidification and small-space desiccants.
Temperature and Humidity Fan Controllers: What to Check Before Selection
Check what ventilation can actually change, then match sensors, control logic, output type and electrical ratings to the fan and process.
Humidifier Control Systems: Setpoints, Sensors and Maintenance
Choose humidifier controls from the actual moisture task: setpoint limits, sensors, output, water quality and maintenance. Compare energy by delivered moisture and duty.
Laminate on a Wood Subfloor: When Is a Moisture Barrier Needed?
Decide whether laminate over a wood subfloor needs a vapor-control layer by checking the floor assembly, wood moisture and the exact product instructions.
Temperature & Humidity Monitoring Solutions
Plan an industrial temperature and humidity monitoring system around representative sensor locations, timestamped records, tested alarms and a defined response owner.
Industrial Carpet Drying Systems: Assess, Dry and Verify
Select a commercial carpet drying setup by water source, wet layers, extraction, airflow and dehumidification. Verify the backing and floor; contaminated water needs a separate plan.
What Should Indoor Humidity Be in Winter? Check the Cold Surfaces
Use EPA home moisture guidance as a starting point, then check windows, walls and other cold surfaces. Winter RH is a measured decision, not one universal setpoint.
Temperature and Humidity Control for Poultry Egg Incubators
Check poultry species, incubation stage and incubator airflow design before setting temperature and humidity. Verify egg-level readings, ventilation and alarms.
Vertical Farming Companies: Roles and How to Compare Partners
Vertical farming companies do not all provide the same service. Some operate farms. Others supply cultivation systems, racks, lighting, irrigation, controls, climate equipment, software, or project integration. Before comparing vendors, define the role you need and the decisions that role must ow…
How to Properly Install a Crawl Space Vapor Barrier for Moisture Control
Install a crawl-space ground vapor retarder by checking liquid-water sources first, selecting a durable membrane, planning seams and wall rises, then verifying continuity and drainage.
NO MATCHING RESOURCES
Try a broader term or describe the application differently.
Search by equipment type, humidity issue, industry, installation condition, or a technical topic.
APPLY THE INFORMATION
Need help applying an article to a real project?
Share the application, operating conditions, target, and installation limits. We can help identify the questions that matter before product selection or engineering review.
Discuss Your Requirement