Product family
Ultrasonic Humidifier
Ultrasonic humidification products for humidity compensation and controlled-environment applications.
Yakeclimate 
Product selection should be confirmed against temperature, target humidity, airflow, drainage, power supply, and installation conditions.
DEFINITION
What is an industrial dehumidifier?
An industrial dehumidifier is a humidity-control device that removes water vapor from ambient or process air and holds relative humidity at a defined operating level. Industrial models are specified against the operating temperature, target humidity, airflow, drainage, and power supply of a project rather than by floor area alone.
The Ultrasonic Humidifier range covers multiple capacity classes, with rated values published in each model specification table.
Yakeclimate designs and manufactures industrial dehumidification equipment for complex climate applications, with a focus on agriculture and energy projects.
Product overview
How this product family supports a project
Ultrasonic humidification products for humidity compensation and controlled-environment applications.
01
Multiple humidification-output ranges for different room volumes and process needs.
02
Fine water mist supports humidity compensation without a heating process.
03
Automatic humidity-control functions vary by model and configuration.
04
Project selection should consider water quality, airflow, room conditions, and installation position.
TECHNOLOGY COMPARISON
Refrigerant versus desiccant rotor technology
The Ultrasonic Humidifier on this page is part of the Ultrasonic Humidifier range; compare the rated values in each model specification table with the working principles below.
| Technology route | How it works | Typical applications |
|---|---|---|
| Refrigerant dehumidification | Cools air below dew point to condense and separate water vapor | Conventional dehumidification duty in commercial and industrial spaces |
| Desiccant rotor dehumidification | Adsorbs moisture onto a rotating wheel and regenerates it continuously | Lower-temperature or lower-humidity targets in storage and process environments |
| Ultrasonic humidification | Adds fine water mist to raise or compensate relative humidity | Humidity compensation in agriculture and process areas |
Application fit
Where this product can be evaluated
Application fit depends on the moisture load, operating temperature, room volume, airflow path, and installation constraints.
- 01Greenhouses
- 02textile
- 03cold storage
- 04air treatment
- 05humidity-compensation projects
Available models
Model range
RYJS-03D Ultrasonic Humidifier – 3kg/h Output Humidifier
3 kg/h 
RYJS-06D Ultrasonic Humidifier – 6kg/h Output Humidifier
6 kg/h RYJS-09D Ultrasonic Humidifier – 9kg/h Output Humidifier
9 kg/h RYJS-12D Ultrasonic Humidifier – 12kg/h Output Humidifier
12 kg/h 
RYJS-15D Ultrasonic Humidifier – 15kg/h Output Humidifier
15 kg/h RYJS-18D Ultrasonic Humidifier – 18kg/h Output Humidifier
18 kg/h RYJS-21D Ultrasonic Humidifier – 21kg/h Output Humidifier
21 kg/h 
RYJS-24D Ultrasonic Humidifier – 24kg/h Output Humidifier
24 kg/h RYJS-30D Ultrasonic Humidifier – 30kg/h Output Humidifier
30 kg/h RYJS-36D Ultrasonic Humidifier – 36kg/h Output Humidifier
36 kg/h RYJS-42D Ultrasonic Humidifier – 42kg/h Output Humidifier
42 kg/h 
RYJS-48D Ultrasonic Humidifier – 48kg/h Output Humidifier
48 kg/h RYJS-54D Ultrasonic Humidifier – 54kg/h Output Humidifier
54 kg/h RYJS-60D Ultrasonic Humidifier – 60kg/h Output Humidifier
60 kg/h 
RYJS-66D Ultrasonic Humidifier – 66kg/h Output Humidifier
66 kg/h RYJS-72D Ultrasonic Humidifier – 72kg/h Output Humidifier
72 kg/h RYJS-78D Ultrasonic Humidifier – 78kg/h Output Humidifier
78 kg/h RYJS-84D Ultrasonic Humidifier – 84kg/h Output Humidifier
84 kg/h RYJS-90D Ultrasonic Humidifier – 90kg/h Output Humidifier
90 kg/h RYJS-96D Ultrasonic Humidifier – 96kg/h Output Humidifier
96 kg/h RYJS-102D Ultrasonic Humidifier – 102kg/h Output Humidifier
102 kg/h SELECTION STEPS
How to select the right configuration
- Step 1 — define the operating conditions. Record the temperature range, current and target relative humidity, moisture load, and the volume of the room or enclosure to be protected.
- Step 2 — confirm the site constraints. Check the available power supply, drainage method, airflow or static-pressure requirement, and installation space; for ceiling, cabinet, or portable mounting confirm the fixing method and service access.
- Step 3 — review the rated data and confirm the configuration. Compare the rated capacity in l/24h and the surrounding specification values in the table against the recorded conditions, then confirm the configuration with Yakeclimate before ordering.
FAQ
Frequently Asked Questions
Is the Ultrasonic Humidifier capacity rating based on standard testing conditions?
Rated capacity is published under the named condition in the specification table (for example 30°C/80% RH, in l/24h). Actual moisture removal depends on operating temperature, humidity, airflow, and installation conditions.
Which applications can the Ultrasonic Humidifier support?
The applications listed on this page are evaluation starting points. Final suitability depends on the moisture load, temperature, airflow, and installation limits of the project.
How does Yakeclimate support project configuration?
We co-develop application-specific dehumidification equipment around the operating conditions, interfaces, and integration requirements of the wider project or system.
Project support
Confirm the right configuration for your operating conditions.
Share the operating temperature, current and target humidity, room dimensions, airflow, power supply, drainage method, and installation limits. Yakeclimate can use these details to recommend a suitable next step.
Send project requirements