Resources / Technical Articles
Technical Articles for Humidity-Control Decisions
Browse application notes, engineering explanations, equipment comparisons, and practical guidance for agriculture, energy, electrical, and industrial environments.
Use the article library to understand a technical question, then return to the resource center for cases, product information, video, and project-preparation material.
Start with the operating condition behind the question. Search by application, humidity risk, equipment type, installation condition, or technical topic.
BROWSE ARTICLE TOPICS
Start with the application or equipment context
01
Agriculture & Controlled Environments
Application notes and selection guidance for greenhouses, indoor cultivation rooms, drying spaces, and storage environments where humidity affects the crop rather than the building.
Browse articles → 02Industrial Dehumidification
Comparisons and engineering notes covering refrigerant, ceiling-mounted, desiccant, and low-dew-point equipment, and the operating conditions that decide between them.
Browse articles → 03Energy Storage & Electrical Environments
Guidance on dew point, condensation risk, compact installation, controls, and validation for battery energy storage, cabinets, containers, and switchgear.
Browse articles → 04Commercial & Building Moisture Control
Practical guidance on condensation, water damage, drying, mold prevention, and equipment choices for commercial spaces and building moisture problems.
Browse articles → 05Humidification & Air Quality
Technical articles on humidification, ventilation, filtration, humidity measurement, and how moisture control interacts with wider air systems.
Browse articles → 06Humidity Science & Engineering
Explanations of relative humidity, dew point, condensation, moisture measurement, monitoring, and controls for industrial humidity-control decisions.
Browse articles →TECHNICAL ARTICLE LIBRARY
Search, filter, and continue from the topic relevant to your work
Each article has a clear place in the resource library and connects to relevant industries, product families, cases, and project support.
FIND THE RIGHT RESOURCE
Search article titles, summaries, categories, and technical topics.
Search across the resource library.
The Essential Guide to Water Damage Restoration Services
Choose and assess a water-damage restoration service by safety, scope, equipment roles and a documented drying handoff—not a fixed timer or price.
How to Effectively Dry a Concrete Floor After a Leak
After a concrete-floor leak, make the site safe, classify the water, remove standing water, control drying and verify the endpoint required by the next floor use.
Strawberry Greenhouse Temperature Management: Build a Crop-Specific Control Plan
Manage strawberry greenhouse temperature by cultivar, stage, canopy and root-zone measurements rather than a universal setpoint.
Ducted Dehumidifier Systems for Commercial Buildings: Arrangement, Sizing and Integration
Coordinate a ducted dehumidifier’s moisture removal, airflow, external pressure, controls and drainage, then verify the installed arrangement and every served zone.
How Humidity Affects Plant Growth: Reading Air and Leaf VPD
Understand the difference between air and leaf VPD, work through a temperature example, and connect climate records with crop observations.
How Long Should a Dehumidifier Run? Runtime Is a Measurement, Not a Setting
"How long should a dehumidifier run?" is the wrong question, because runtime is not something you set. It is something the equipment reports back to you about your building.
Winter Greenhouse Humidity: Heating, Ventilation, Dew Point and Condensation
Heating a winter greenhouse can reduce relative humidity, but it does not remove water from the air. Condensation risk is controlled only when the project manages both sides of the condition: the air’s dew point and the temperature of glazing, screens, structure, pipes and leaves. Water leaves th…
Industrial Dehumidifier Sizing: Inputs, Moisture Load and Rating Conditions
Prepare an industrial dehumidifier sizing design basis from the control target, moisture sources, entering-air conditions, net airflow humidity-ratio transport, separate process inventory, recovery time and installation constraints.
Greenhouse Dehumidifier Electricity: Meter Boundaries, kWh and Heating Cost
Estimate greenhouse dehumidifier electricity from measured power and operating hours, then account for heating fuel separately. The worked numbers are assumptions, not product ratings.
Solar Heating for a Mini Greenhouse: Size the Night Load Before Choosing Panels
Size solar heating for a mini greenhouse from night heat loss, winter solar resource, storage and backup instead of a panel or battery rule of thumb.
Smart Greenhouse Climate Control: Responsibilities, Interfaces and Commissioning
A smart greenhouse climate-control system is not one controller or one piece of equipment. It is a chain of responsibilities: the grower or agronomist defines crop and production objectives; the supervisory climate computer coordinates heating, ventilation, screens, lighting, irrigation, CO₂ and…
Greenhouse Blackout Curtains: Select and Operate for the Crop’s Light Schedule
Select a greenhouse blackout curtain from crop dark-period and light-leak requirements, then verify controls, airflow and humidity under the actual schedule.
NO MATCHING RESOURCES
Try a broader term or describe the application differently.
Search by equipment type, humidity issue, industry, installation condition, or a technical topic.
APPLY THE INFORMATION
Need help applying an article to a real project?
Share the application, operating conditions, target, and installation limits. We can help identify the questions that matter before product selection or engineering review.
Discuss Your Requirement