Energy Storage Dehumidifier
ADS-500ML
Energy storage semiconductor dehumidifier – 500 mL/24h
ADS-500ML is a compact dehumidifier for battery cabinets, electrical enclosures and energy-storage equipment. Its published removal rating is 500 mL/24h at 35 °C and 85% RH; final selection should be confirmed against the actual temperature, humidity or dew-point target, moisture load, drainage, power, control and installation conditions.
- Dehumidification Capacity
- 500 mL/24h
- Rated Power
- 60 W
- Operating Temperature
- -30–+55 °C
- Power Supply
- AC 220–240V / DC 24V
ADS-500ML 
Product selection should be confirmed against temperature, target humidity, airflow, drainage, power supply, and installation conditions.
DEFINITION
What is an industrial dehumidifier?
An industrial dehumidifier is a humidity-control device that removes water vapor from ambient or process air and holds relative humidity at a defined operating level. Industrial models are specified against the operating temperature, target humidity, airflow, drainage, and power supply of a project rather than by floor area alone.
ADS-500ML is a Energy Storage Dehumidifier unit with a published rated capacity of 500 mL/24h on this page.
Yakeclimate designs and manufactures industrial dehumidification equipment for complex climate applications, with a focus on agriculture and energy projects.
Product overview
What ADS-500ML is designed to do
ADS-500ML is a compact dehumidifier for battery cabinets, electrical enclosures and energy-storage equipment. Its published removal rating is 500 mL/24h at 35 °C and 85% RH; final selection should be confirmed against the actual temperature, humidity or dew-point target, moisture load, drainage, power, control and installation conditions.
01
500 mL/24h rated moisture removal at 35 °C and 85% RH
02
AC 220–240V and DC 24V configurations under one base model
03
ABS enclosure with DIN-rail installation
04
RS485 communication and external hose drainage
05
Published operating range from -30 °C to +55 °C
Technical data
Product specifications
Values below are retained from the current product record. Final configuration should be confirmed in the project quotation.
| Specification | Unit | ADS-500ML |
|---|---|---|
| Dehumidification Capacity (35°C/85% RH) | mL/24h | 500 |
| Power Supply | V/Hz | AC 220–240V 50/60Hz / DC 24V |
| Rated Power | W | 60 |
| Rated Current | A | 0.3 AC / 2.4 DC |
| Airflow | m³/h | 40 |
| Communication | — | RS485 |
| Drainage Method | — | External hose drainage |
| Operating Temperature | °C | -30–+55 |
| Shell Material | — | ABS |
| Installation | — | DIN rail |
| Machine Dimensions (L×W×H) | mm | 224 × 115 × 50 |
| Net Weight | kg | 2 |
TECHNOLOGY COMPARISON
Refrigerant versus desiccant rotor technology
The ADS-500ML on this page is a Energy Storage Dehumidifier unit; compare its published ratings in the specification table with the working principles below.
| Technology route | How it works | Typical applications |
|---|---|---|
| Refrigerant dehumidification | Cools air below dew point to condense and separate water vapor | Conventional dehumidification duty in commercial and industrial spaces |
| Desiccant rotor dehumidification | Adsorbs moisture onto a rotating wheel and regenerates it continuously | Lower-temperature or lower-humidity targets in storage and process environments |
| Ultrasonic humidification | Adds fine water mist to raise or compensate relative humidity | Humidity compensation in agriculture and process areas |
Application fit
Where this product can be evaluated
Application fit depends on the moisture load, operating temperature, room volume, airflow path, and installation constraints.
- 01Battery cabinets
- 02Electrical enclosures
- 03Compact energy-storage equipment
Compare the range
Other Energy Storage Dehumidifier models
SELECTION STEPS
How to select the right configuration
- Step 1 — define the operating conditions. Record the temperature range, current and target relative humidity, moisture load, and the volume of the room or enclosure to be protected.
- Step 2 — confirm the site constraints. Check the available power supply, drainage method, airflow or static-pressure requirement, and installation space; for ceiling, cabinet, or portable mounting confirm the fixing method and service access.
- Step 3 — review the rated data and confirm the configuration. Compare the rated capacity in l/24h and the surrounding specification values in the table against the recorded conditions, then confirm the configuration with Yakeclimate before ordering.
FAQ
Frequently Asked Questions
Is the ADS-500ML capacity rating based on standard testing conditions?
Rated capacity is published under the named condition in the specification table (for example 30°C/80% RH, in l/24h). Actual moisture removal depends on operating temperature, humidity, airflow, and installation conditions.
Which applications can the ADS-500ML support?
The applications listed on this page are evaluation starting points. Final suitability depends on the moisture load, temperature, airflow, and installation limits of the project.
How does Yakeclimate support project configuration?
We co-develop application-specific dehumidification equipment around the operating conditions, interfaces, and integration requirements of the wider project or system.
Project support
Confirm the right configuration for your operating conditions.
Share the operating temperature, current and target humidity, room dimensions, airflow, power supply, drainage method, and installation limits. Yakeclimate can use these details to recommend a suitable next step.
Send project requirements