Yakeclimate 除湿设备生产线

资源中心 / 技术文章

面向湿度控制决策的技术文章

浏览面向农业、能源、电气与工业环境的应用说明、工程解释、设备对比与实用指南。文章正文目前为英文。

您可以先通过文章理解具体问题,再返回资源中心查看案例、产品资料、企业视频和项目准备信息。

技术文章 / 01
从问题背后的运行工况开始。 可按应用场景、湿度风险、设备类型、安装条件或技术主题搜索。

技术文章库

搜索和筛选与当前工作最相关的技术主题

每篇文章都在技术文章库中有明确入口,并关联相关行业、产品系列、案例和项目支持。

Conceptual cutaways of same-size container shells showing different equipment occupancy, free air spaces, and a separated compartment.
Energy Storage & Electrical Environments

BESS Container Dehumidifier Sizing: Required Inputs

A 20 ft or 40 ft BESS container does not have a standard dehumidifier capacity. Container length describes the outer boundary, not the moisture load. Two containers of the same size can require very different equipment because their free air volume, ventilation, door use, internal temperature, cl…

Illustrative air-handler service view identifying the cooling coil, condensate drain tray, and connected drain path.
Energy Storage & Electrical Environments

BESS Container Condensation with AC: Causes, Checks and Control Boundaries

A BESS container can develop condensation even when its air conditioner is operating. Cooling controls air temperature and may remove some moisture, but it does not guarantee that every local surface remains warmer than the dew point of the air touching it. Moisture entry, cold surfaces, airflow, cy

Greenhouse moisture-source illustration identifying crop transpiration, wet floor surfaces, and entering outdoor air.
Agriculture & Controlled Environments

Greenhouse Humidity Control: How to Diagnose the Load and Choose a Control Route

Greenhouse humidity control should begin with a moisture balance, not an equipment list. Identify where water enters the air, when removal becomes insufficient, and which crop or structural surfaces approach the local dew point. Only then can ventilation, heating, air movement, and mechanical dehumi

Separate shielded air-condition sensors outdoors and at crop height inside a greenhouse, with a roof vent above.
Agriculture & Controlled Environments

Ventilation or Dehumidification for a Greenhouse? Test the Conditions First

Ventilation only dehumidifies a greenhouse when the outdoor air can actually absorb moisture from inside, which depends on the vapor-pressure difference between the two air masses. When it can, ventilation is often the lower-capital route, but it can raise heating or CO2 costs, especially in cold or

Contact surface-temperature probe and a separate nearby air-condition sensor mounted in the same enclosure corner.
Energy Storage & Electrical Environments

How to Define Dew Point Control Conditions for Battery Enclosures

Dew point control for a battery enclosure should be defined around the coldest relevant surface and the moisture condition of the air touching it. The control specification must also state where the air is measured, how measurement uncertainty is handled, and which operating transitions are included

Educational water mass balance: dry solids stay at 800 kg while water decreases from 200 to 109.1 kg.
Agriculture & Controlled Environments

Grain and Seed Drying: Moisture Load and Inputs

![Infographic showing post-harvest drying stages and moisture removal.](https://cdn.sanity.io/images/rv02znz4/production/0cd858751d4a10783360c67b8da1d69a9e2bbd88-1024x575.jpg?w=1200&q=75&fm=webp&fit=max&auto=format)

Handheld instrument measuring moisture content in wood.
Humidity Science & Engineering

Wood Moisture Measurement Instruments

A wood moisture meter is a device that measures the internal moisture of lumber, panels, or other wooden material. In indoor farms and grow rooms using wood, precise moisture readings prevent warping, mold, and unseen rot that damages crops and equipment.

Infographic showing methods used to analyze moisture in food products.
Humidity Science & Engineering

Moisture Analysis in Food Products

Moisture analysis in food products refers to the determination of how much moisture is contained within a raw material or finished product in a definitive, reproducible manner.

应用这些信息

需要把文章内容应用到具体项目吗?

请提交应用场景、运行工况、目标和安装限制。我们可以协助梳理在产品选型或工程评审前需要确认的问题。

沟通项目需求