资源中心 / 能源
储能与电气柜体中的结露与湿度控制
面向电池储能、柜体、集装箱与开关设备的露点、结露风险、紧凑安装、控制与验证指导资料。
用这些资料先评估柜体内部的结露暴露程度，再进入设备选型或验证要求的定义。
在封闭柜体里，结露首先是可靠性问题，其次才是环境舒适度问题。 这些资料把环境条件、内部负荷、露点与设备选型串联起来。
资料分类
在资料分类与相关行业、产品或工程页面之间切换
01
能源 — ANTIS
面向电池储能、电气柜、开关设备与封闭能源环境的设备与项目支持。
打开相关页面 → 02农业与可控环境 (45)
面向温室、室内种植间、干燥空间与仓储环境的应用说明与选型指导——在这些场景里，湿度影响的是作物本身，而不只是空间舒适度。
浏览该分类 → 03工业除湿 (38)
覆盖冷冻、吊顶、转轮与低露点设备的对比与工程说明，以及决定它们取舍的运行工况。
浏览该分类 → 04商业与建筑湿度控制 (21)
围绕结露、水损、干燥、防霉，以及商业空间和建筑湿度问题中的设备选择提供实用说明。
浏览该分类 → 05加湿与空气质量 (5)
围绕加湿、通风、过滤、湿度测量，以及湿度控制与整体空气系统的协同关系提供技术文章。
浏览该分类 → 06湿度科学与工程 (14)
解释相对湿度、露点、结露、湿度测量、监控与控制，帮助理解工业湿度控制中的关键判断。
浏览该分类 → 07全部文章 (145)
资料库全部文章，按时间倒序。
浏览该分类 →技术文章库
搜索和筛选与当前工作最相关的技术主题
每篇文章都在技术文章库中有明确入口，并关联相关行业、产品系列、案例和项目支持。
找到合适的资料
搜索文章标题、摘要、分类与技术主题。文章内容为英文，建议使用英文关键词。
在资料库中搜索。
Data Center vs BESS Humidity Control
Electrical Cabinet Dehumidifiers: Selection and Drainage
Battery Room Ventilation and Humidity Control: Two Jobs, Sized Separately
Energy Storage Technologies and Humidity Risks
How Cabinet Condensation Control Units Work
Low-Temperature Desiccant Dehumidification for Wind and Substation Equipment
Wind turbines and substation equipment can face cold metal surfaces, humid air, repeated temperature changes and long periods with limited service access. In these conditions, the environmental-control question is not simply “how many litres per day?”
Air Leakage, Service Doors and Moisture Load in Sealed Enclosures
A sealed electrical enclosure is not automatically a moisture-free enclosure. Water vapour may be trapped during assembly, introduced when service doors open or exchanged through gaskets, cable entries, vents and pressure-equalisation devices.
Cable Trench Moisture and Condensation in Switchgear
A wet cable trench can supply both liquid water and water vapour to switchgear. If cable entries are open or poorly sealed, humid trench air can move into the cable compartment as temperature and pressure change. Condensation then appears on the coldest internal surfaces, even when the switchgear…
Sensor Placement for Dew Point and Condensation Monitoring
A humidity reading is only representative of the air around the sensor. It does not prove that every compartment, cable chamber or metal surface in a battery energy storage system is protected from condensation.
Charge and Discharge Cycles: Condensation Risk in BESS
Charge and discharge cycles do not create condensation by themselves. They change the heat released inside a battery energy storage system, the duty of its cooling equipment and the temperatures of walls, pipes, cold plates and electrical components. Condensation becomes possible when any of thos…
Why an IP-Rated Enclosure Can Still Condense
An IP-rated enclosure can still condense because ingress protection and condensation control are different design questions. IEC 60529 classifies how an enclosure protects against access to hazardous parts, solid foreign objects and water under specified conditions. It does not guarantee that eve…
Consistency Across Multiple Battery Cabinets: Controls, Alarms and Maintenance
A multi-cabinet battery energy storage system needs more than identical dehumidifiers. Consistency depends on using the same equipment definition, sensor basis, control states, alarm meanings, communication map, drainage arrangement, maintenance method and acceptance test.
没有匹配的资料
试试更宽泛的关键词，或换一种方式描述应用。
可以按设备类型、湿度问题、行业、安装条件或技术主题搜索。
应用这些信息
需要把文章内容应用到具体项目吗？
请提交应用场景、运行工况、目标和安装限制。我们可以协助梳理在产品选型或工程评审前需要确认的问题。
沟通项目需求