资源中心 / 技术文章
面向湿度控制决策的技术文章
浏览面向农业、能源、电气与工业环境的应用说明、工程解释、设备对比与实用指南。文章正文目前为英文。
您可以先通过文章理解具体问题，再返回资源中心查看案例、产品资料、企业视频和项目准备信息。
从问题背后的运行工况开始。 可按应用场景、湿度风险、设备类型、安装条件或技术主题搜索。
按文章主题浏览
从应用场景或设备工况开始
01
农业与可控环境
面向温室、室内种植间、干燥空间与仓储环境的应用说明与选型指导——在这些场景里，湿度影响的是作物本身，而不只是空间舒适度。
浏览文章 → 02工业除湿
覆盖冷冻、吊顶、转轮与低露点设备的对比与工程说明，以及决定它们取舍的运行工况。
浏览文章 → 03储能与电气环境
面向电池储能、柜体、集装箱与开关设备的露点、结露风险、紧凑安装、控制与验证指导资料。
浏览文章 → 04商业与建筑湿度控制
围绕结露、水损、干燥、防霉，以及商业空间和建筑湿度问题中的设备选择提供实用说明。
浏览文章 → 05加湿与空气质量
围绕加湿、通风、过滤、湿度测量，以及湿度控制与整体空气系统的协同关系提供技术文章。
浏览文章 → 06湿度科学与工程
解释相对湿度、露点、结露、湿度测量、监控与控制，帮助理解工业湿度控制中的关键判断。
浏览文章 →技术文章库
搜索和筛选与当前工作最相关的技术主题
每篇文章都在技术文章库中有明确入口，并关联相关行业、产品系列、案例和项目支持。
找到合适的资料
搜索文章标题、摘要、分类与技术主题。文章内容为英文，建议使用英文关键词。
在资料库中搜索。
How Long Should a Dehumidifier Run? Runtime Is a Measurement, Not a Setting
"How long should a dehumidifier run?" is the wrong question, because runtime is not something you set. It is something the equipment reports back to you about your building.
Winter Greenhouse Humidity: Heating, Ventilation, Dew Point and Condensation
Heating a winter greenhouse can reduce relative humidity, but it does not remove water from the air. Condensation risk is controlled only when the project manages both sides of the condition: the air’s dew point and the temperature of glazing, screens, structure, pipes and leaves. Water leaves th…
Industrial Dehumidifier Sizing: Inputs, Moisture Load and Rating Conditions
An industrial dehumidifier should be sized from the moisture that must be removed at the actual entering-air condition—not from floor area alone. The minimum project brief needs the control objective, temperature and humidity design points, moisture sources, outdoor-air and leakage rates, peak op…
Understanding Dehumidifier Energy Consumption: Key Factors and Costs
Dehumidifier energy consumption refers to how much energy a dehumidifier consumes to extract water from a volume of air in a given period of time. Its power draw connects to its size, type, and how hard it’s working in the space.
Solar Powered Mini Greenhouse Heating Solutions: Efficient, Eco-Friendly Options
Solar-powered mini greenhouse heating generates heat for small greenhouses with solar panels, aiding plant growth in cold weather.
Smart Greenhouse Climate Control: Responsibilities, Interfaces and Commissioning
A smart greenhouse climate-control system is not one controller or one piece of equipment. It is a chain of responsibilities: the grower or agronomist defines crop and production objectives; the supervisory climate computer coordinates heating, ventilation, screens, lighting, irrigation, CO₂ and…
Greenhouse Blackout Curtain Benefits & Selection Guide
Greenhouse blackout curtains are employed to block light in greenhouses to assist growers in managing day length for crops requiring stringent light or dark cycles.
Greenhouse Air-Distribution Tubes: Getting Air to the Canopy, Not Just Into the House
A polyethylene distribution tube that discharges most of its air in the first ten metres is not a ventilation system. It is an expensive draught at one end of the house and a stagnant zone at the other — and it is the single most common way growers end up with uniform equipment and non-uniform cr…
Grow Tent Temperature and Humidity: Why Small Spaces Are Harder, Not Easier
A grow tent has the same physics as a commercial facility and none of the buffering. The moisture load per unit of air volume is far higher, the thermal mass is close to zero, and a change that a greenhouse absorbs over an hour happens in a tent in minutes.
Wet Bulb Temperature Calculator
Dry-wet bulb to rh conversion stands for dry and wet bulb measurements to relative humidity. Dry bulb is the air’s actual temperature and wet bulb is lower due to evaporation of water. The difference between these two values is crucial for this computation.
10 Effective Techniques to Prevent Condensation in Your Home
Condensation prevention techniques refer to methods and equipment that prevent droplets of water from forming on surfaces in industrial facilities and plants.
Accurate Moisture Content Analysis – Techniques & Challenges
To analyze moisture content is to test determine the amount of water present in a substance. These precise readings allow factories to protect shipments, prevent corrosion and inhibit fungal growth or rot. Most plants employ sensors or lab tests for this work.
没有匹配的资料
试试更宽泛的关键词，或换一种方式描述应用。
可以按设备类型、湿度问题、行业、安装条件或技术主题搜索。
应用这些信息
需要把文章内容应用到具体项目吗？
请提交应用场景、运行工况、目标和安装限制。我们可以协助梳理在产品选型或工程评审前需要确认的问题。
沟通项目需求