资源中心 / 农业
种植与采后环境的湿度控制
面向温室、室内种植间、干燥空间与仓储环境的应用说明与选型指导——在这些场景里，湿度影响的是作物本身，而不只是空间舒适度。
用这些资料先描述清楚种植条件、湿负荷与气流状况，再进入设备比较。
种植空间里的湿度是作物条件，不只是舒适度设定。 这些资料把作物阶段、湿负荷、气流与设备选型串联起来。
资料分类
在资料分类与相关行业、产品或工程页面之间切换
01
农业 — YAKE
面向种植、温室与可控环境设施的设备系列、项目支持与应用范围。
打开相关页面 → 02工业除湿 (38)
覆盖冷冻、吊顶、转轮与低露点设备的对比与工程说明，以及决定它们取舍的运行工况。
浏览该分类 → 03储能与电气环境 (22)
面向电池储能、柜体、集装箱与开关设备的露点、结露风险、紧凑安装、控制与验证指导资料。
浏览该分类 → 04商业与建筑湿度控制 (21)
围绕结露、水损、干燥、防霉，以及商业空间和建筑湿度问题中的设备选择提供实用说明。
浏览该分类 → 05加湿与空气质量 (5)
围绕加湿、通风、过滤、湿度测量，以及湿度控制与整体空气系统的协同关系提供技术文章。
浏览该分类 → 06湿度科学与工程 (14)
解释相对湿度、露点、结露、湿度测量、监控与控制，帮助理解工业湿度控制中的关键判断。
浏览该分类 → 07全部文章 (145)
资料库全部文章，按时间倒序。
浏览该分类 →技术文章库
搜索和筛选与当前工作最相关的技术主题
每篇文章都在技术文章库中有明确入口，并关联相关行业、产品系列、案例和项目支持。
找到合适的资料
搜索文章标题、摘要、分类与技术主题。文章内容为英文，建议使用英文关键词。
在资料库中搜索。
Greenhouse Night Humidity Control: Dew Point, Leaf Wetness and Pre-Dusk Strategy
Greenhouse night humidity control is mainly a dew point and leaf-wetness problem. When the greenhouse cools after sunset, the same amount of water vapor can push RH sharply upward and bring leaves, fruit, glazing or curtains close to condensation.
Automated Greenhouse Humidity Control: Sensor Logic, Staging and Equipment Interfaces
Automated greenhouse humidity control works when sensors, setpoints, ventilation, curtains, heating and dehumidifiers follow the same logic. A dehumidifier that only switches on at a fixed RH threshold may fight the greenhouse computer instead of supporting it.
Greenhouse Dehumidification Design Data: What to Send Before Sizing Equipment
Greenhouse dehumidification design starts with project data, not with a model number. Crop water use, night temperature, screens, ventilation, CO2 strategy and airflow layout can change the required moisture-removal capacity by a large margin.
How Many Dehumidifiers Does a 5-Hectare Greenhouse Need? A Sizing Walk-Through
A 5-hectare tomato greenhouse holding 75% RH at 16 °C sounds like a single-number question. It isn't. Across the three scenarios below the count runs from 49 to 101 units — more than a factor of two, and a CAPEX spread in the tens of thousands of EUR.
Vertical Farming Climate Control: The Closed-System Problem
Grow Room Temperature and Humidity Control
Humidity Management for High-Value Controlled Crops
Tomato Greenhouse Dehumidification: VPD, Disease Risk and Equipment Sizing Inputs
Tomato greenhouse dehumidification should be sized around transpiration, night cooling and canopy airflow. RH alone is not enough because disease risk and plant water movement depend on temperature, leaf wetness and vapor pressure deficit.
Best Industrial Dehumidifier for Greenhouse Projects: Selection Criteria That Matter
The best industrial dehumidifier for a greenhouse is the one that can remove the crop's real moisture load while matching the greenhouse temperature range, airflow path, drainage, corrosion exposure and control strategy. A brand list is less useful than a clear selection checklist.
Industrial Dehumidifier for Greenhouse Cost: What Changes the Quote
The cost of an industrial dehumidifier for a greenhouse depends on moisture load, technology choice, airflow distribution, corrosion protection, controls and installation scope. A price without those inputs is usually not a reliable project number.
Greenhouse Dehumidification: Where It Fits, What It Costs, and How to Size It
Almost every litre of irrigation water that does not leave as drain leaves as water vapour. In a greenhouse, that vapour is the humidity problem — and it means the moisture load is not a weather condition to be endured but a quantity that can be measured from records the grower already keeps.
Ventilation vs. Dehumidification in Controlled Agriculture: The Test That Decides It
Outside air at 90 % relative humidity can dry a greenhouse. Outside air at 85 % relative humidity can make it wetter. The difference has nothing to do with the humidity readings and everything to do with temperature — and getting this backwards is the most common reason a ventilation strategy qui…
没有匹配的资料
试试更宽泛的关键词，或换一种方式描述应用。
可以按设备类型、湿度问题、行业、安装条件或技术主题搜索。
应用这些信息
需要把文章内容应用到具体项目吗？
请提交应用场景、运行工况、目标和安装限制。我们可以协助梳理在产品选型或工程评审前需要确认的问题。
沟通项目需求