资源中心 / 能源
储能与电气柜体中的结露与湿度控制
面向电池储能、柜体、集装箱与开关设备的露点、结露风险、紧凑安装、控制与验证指导资料。
用这些资料先评估柜体内部的结露暴露程度，再进入设备选型或验证要求的定义。
在封闭柜体里，结露首先是可靠性问题，其次才是环境舒适度问题。 这些资料把环境条件、内部负荷、露点与设备选型串联起来。
资料分类
在资料分类与相关行业、产品或工程页面之间切换
01
能源 — ANTIS
面向电池储能、电气柜、开关设备与封闭能源环境的设备与项目支持。
打开相关页面 → 02农业与可控环境 (68)
面向温室、室内种植间、干燥空间与仓储环境的应用说明与选型指导——在这些场景里，湿度影响的是作物本身，而不只是空间舒适度。
浏览该分类 → 03工业除湿 (42)
覆盖冷冻、吊顶、转轮与低露点设备的对比与工程说明，以及决定它们取舍的运行工况。
浏览该分类 → 04商业与建筑湿度控制 (19)
围绕结露、水损、干燥、防霉，以及商业空间和建筑湿度问题中的设备选择提供实用说明。
浏览该分类 → 05加湿与空气质量 (4)
围绕加湿、通风、过滤、湿度测量，以及湿度控制与整体空气系统的协同关系提供技术文章。
浏览该分类 → 06湿度科学与工程 (15)
解释相对湿度、露点、结露、湿度测量、监控与控制，帮助理解工业湿度控制中的关键判断。
浏览该分类 → 07全部文章 (179)
资料库全部文章，按时间倒序。
浏览该分类 →技术文章库
搜索和筛选与当前工作最相关的技术主题
每篇文章都在技术文章库中有明确入口，并关联相关行业、产品系列、案例和项目支持。
找到合适的资料
搜索文章标题、摘要、分类与技术主题。文章内容为英文，建议使用英文关键词。
在资料库中搜索。
How to Diagnose Condensation in Battery Cabinets
Diagnosing condensation in a battery cabinet or BESS container starts with two traces on the same time axis: internal dew point and the temperature of the coldest suspected surface. Water forms wherever the surface trace reaches or falls below the dew-point trace. The rest of the investigation id…
BESS Container Dehumidifier Sizing: Required Inputs
A 20 ft or 40 ft BESS container does not have a standard dehumidifier capacity. Container length describes the outer boundary, not the moisture load. Two containers of the same size can require very different equipment because their free air volume, ventilation, door use, internal temperature, cl…
Heater, Ventilation or Dehumidifier for Enclosures?
Compare heating, ventilation, passive desiccant and active moisture removal through the conditions and evidence each enclosure method needs.
BESS Container Condensation with AC: Causes, Checks and Control Boundaries
A BESS container can develop condensation even when its air conditioner is operating. Cooling controls air temperature and may remove some moisture, but it does not guarantee that every local surface remains warmer than the dew point of the air touching it. Moisture entry, cold surfaces, airflow, cy
Humidity Control in Battery Cabinets: Condensation and Moisture Risks
Battery-cabinet moisture risk depends on local surfaces, air exchange, contaminants and equipment limits. Learn the condensation basics and where to find specialist design guidance.
How to Define Dew Point Control Conditions for Battery Enclosures
Dew point control for a battery enclosure should be defined around the coldest relevant surface and the moisture condition of the air touching it. The control specification must also state where the air is measured, how measurement uncertainty is handled, and which operating transitions are included
Data Center Free Cooling: Air-Side, Indirect and Water-Side Options
Compare direct air-side, indirect air-side and water-side data-center free cooling by heat path, climate, IT limits, humidity exposure and whole-system energy and water use.
没有匹配的资料
试试更宽泛的关键词，或换一种方式描述应用。
可以按设备类型、湿度问题、行业、安装条件或技术主题搜索。
应用这些信息
需要把文章内容应用到具体项目吗？
请提交应用场景、运行工况、目标和安装限制。我们可以协助梳理在产品选型或工程评审前需要确认的问题。
沟通项目需求